The RGB Booster achieves high image quality with levels of colour reproduction (up to 145% that of conventional models) and brightness that make each colour stand out. It combines Panasonic's proprietary Vivid Colour Control technology with a newly engineered Lamp Modulation Drive System for a 1-chip DLP™ projector that produces bright and vivid colours. 

Vivid Color Control
This unique control technology optimises the use of the colour segment areas of the colour wheel. It increases the brightness of each RGB colour by minimising the unallocated portions between the colours, to achieve truly vivid colouring. 

Lamp Modulation Drive System
With the new lamp modulation technology, the projector is now able to control the lamp intensity for each of the red, green, blue, and white segments of the colour wheel separately. Because the actual light output is controlled in relation to each colour segment, light usage is optimised and colour balance is obtained without lowering the brightness. This results in bright vivid images with increased colour fidelity.

High-efficiency light convergence technology and a colour wheel work together to achieve an outstanding 5,000 lm of brightness. It reproduces clear, crisp images even in bright rooms.

This advanced image-processing circuit analyses the video signal frequency range for each scene by extracting data on the distribution of high, mid, and low-frequency components, and brings out fine details accordingly. The resulting images have a more natural, three-dimensional appearance with crisp, clear detail.

Image details are less clear when a projector is used in a room with the lights on. Panasonic's System Daylight View 2 improves brightness perception by adjusting sharpness, gamma curves, and colour corrections. This produces crisper, more stunning images with vivid colours even under bright conditions. 

The wide adjustment range of the powered horizontal/vertical lens shift function assures virtually distortion-free images and adds convenience and versatility. It lets you easily make adjustments with the remote control. The unit can also be rotated 360° vertically. This means you can install it at any angle you want, to accommodate different installation conditions.

The mechanical lens shutter completely blocks annoying light leakage when the PT-D5000ES is on standby or temporarily not in use, such as during a meeting.

The LAN terminals support PJLink™ Class 1 connection, which is highly convenient for system construction.

Panasonic's original "Multi Projector Monitoring & Control" freeware allows the user to control and monitor multiple projectors at the same time via LAN. Projectors can be scheduled to turn on and off at a certain hour everyday. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.

The PT-D5000ES has attained a low standby power level of 0.3 W, which is a top-class level in its class. It also helps to slash running costs, and reduces environmental impact. 

*In Eco standby mode, LAN-based network functions such as the standby ON function will not operate.

Panasonic works from every angle to minimise environmental impact in the product design, production and delivery processes, and in the performance of the product during its life cycle. The PT-D5000ES reflects the following ecological considerations. 

• No halogenated flame retardants are used in the cabinet.
• Lamp power switching further reduces power consumption.
• Auto Power Save activates standby mode when no signal is input.
• Standby power consumption of only 0.3 W has been achieved.

• Full 10-bit Signal Processing
• 3D Colour Management System
• HD IP Converting Circuitry
• Digital Signal Noise Reduction Circuitry
• Dynamic Sharpness Control Circuitry
• 30m Long Range Wireless Remote Control
• Direct Power Off

Specifications
Power supply	220–240 V AC 50/60 Hz
Power consumption	600 W (670 VA) (Eco standby mode*1: 0.3 W, Standby mode normal: 9 W. Both with fan stopped.)
DLP™ chip
Panel size	0.7˝ diagonal (4:3 aspect ratio)
Display method	DLP™ chip x 1, DLP™ system
Pixels	786,432 (1,024 x 768) x 1, total of 786,432 pixels
General
Lens	Powered zoom/focus lenses (1.8–2.4:1), F 1.7–2.0, f 25.6–33.8 mm
Lamp	240 W UHM lamps (x 2) (dual-lamp system)
Screen size	50–600 inches (50–200 inches with the ET-DLE055), 4:3 aspect ratio
Brightness*2	5,000 lumens (dual-lamp)
Centre-to-corner uniformity*2	90 %
Contrast*2	1,000:1 (full on/full off)
Resolution	1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
Scanning frequency
DVI-D
Horizontal:	15–91 kHz
Vertical:	50–85 Hz
Dot clock:	162 MHz or lower
RGB
Horizontal:	15–91 kHz
Vertical:	50–85 Hz
Dot clock:	150 MHz or lower
YPBPR (YCBCR)	525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1035/60i, 1125 (1080)/60i, 1125 (1080)/50i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, 1080/60p, 1080/50p
S-Video/Video	(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Horizontal:	15.75/15.63 kHz
Vertical:	50/60 Hz
Installation
Installation	Ceiling/floor, front/rear
Terminals*3
DVI-D IN	DVI-D 24-pin
RGB 1/YPBPR IN	BNC x 5
RGB 2/YPBPR IN	D-sub HD 15-pin
VIDEO IN	BNC
S-VIDEO IN	Mini DIN 4-pin
SERIAL IN	D-sub 9-pin (RS-232C compliant)
SERIAL OUT	D-sub 9-pin
REMOTE 1 IN	M3 jack
REMOTE 1 OUT	M3 jack
REMOTE 2 IN	D-sub 9-pin
LAN	RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink™
Power cord length
Power cord length	3.0 m (9´10˝ )
Cabinet material
Cabinet material	Molded plastic
Dimensions
(W x H x D)	498 mm x 175 mm*4 x 440 mm*5 (19-19/32˝ x 6-7/8˝ *4 x 17-5/16˝ *5) (with supplied lens)
Weight*6
Weight*6	Approx. 16.0 kg (35.3 lbs) (with supplied lens)
Operating temperature
Operating temperature	0–45°C (32–113°F)
Operating humidity
Operating humidity	20–80 % (no condensation)
Supplied accessories
Supplied accessories	Power cord, Wireless/wired remote control unit, Batteries for remote control (R6/LR6 type x 2), Wire rope

^*1 In Eco standby mode, LAN-based network functions such as the standby ON function will not operate. ^*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. ^*3 The HD/SYNC and VD inputs do not accept the tri-level sync signal. ^*4 With leg at shortest position. ^*5 Including the supplied lens. ^*6 Average value. May differ depending on models.